Method Employed

1.   Ultrasonic wave speaker must be directed at target dog directly；

2.   In manual usage, forefinger is placed on groove and press“△”or“○”with thumb. When indicator above “△”is lit, it signifies that ultrasonic wave is emitting and then indicator by the speaker would also twinkle.

3. “△”emits strong ultrasonic wave to prevent and hold back undesirable acts of dogs. When pressing interruptedly, 2 seconds each time, clamour is produced with better effect.

Notes: the strong ultrasonic wave emitted by “△” may make dog feel terror and unease. It is not allowed to flirt dogs with “△” causing not daring to be intimate with you of your pet, or being anti-attacked by evil dog. 

4.   “○”is used to call pet, which is pressed by a fixed tempo and codes able to be heard by pets are emitted. Used to train a pet to understand master’s watchword

5.   Turn switch in groove with forefinger and LED illuminating lamp can be started or closed.

6.   Set switch in groove to “AUTOMATIC” for automatically “hold back” continuous barking of a pet. At “AUTOMATIC”stand-by status, green indicator flickers slowly. If it is necessary to test sound control reaction, clap two times in succession and then red indicator would flicker for 5 seconds signifying normality of auto control system.

Place this product in activity zone of dogs. When a dog barks continuously, “△” ultrasonic wave is triggered, which is unbearable for the pet. Thus he understands “ barking is unwelcome” and therefore terminates annoyed barking.

Note: a single noise like slamming a door or one barking of a dog could not trigger “△” ultrasonic wave. Can  loud noise in succession trigger “△” ultrasonic wave. Please pay attention to this.

7.   At “AUTOMATIC”holding back barking stand-by status, 5% of cell capacity would be consumed within 24 hours. Thus if not necessary, shut off “AUTOMATIC” in time.

8.   When work status indicator turns dim or not lit, it indicates insufficient cell capacity. Recharge cells as soon as possible (refer to Cell Replacement Method).

Training method examples:

A.      Proceeding with “ stop barking” training for pets

1、  When a pet is barking, press switch“△”for a few seconds and say with severe tone “don’t bark”;

2、  When the pet reacts and stops barking, praise pet immediately by saying “fairly well, baby”;

3、  During barking of a pet, repeat the processes: “△”-------can’t be like that -------stop barking------praising ;

4、  A trained pet would stop barking as soon as it hears “△” sound. When “AUTOMATIC” barking refraining function is started up, bark of a dog can be detected automatically, which effectively holds back continuous barking of the pet avoiding molestation to neighbors.

B.      Hold back undesirable acts of one’s pet

a)         Towards undesirable acts of a pet , firstly warn it by words;

b)        When the pet closes his ears to the warning or repeats bad acts, it is possible to use “△” sound to hold it back. When the pet corrects his bad acts, it is necessary to praise it immediately by saying “pretty well’ or “you are so lovely”;

Notes: “△” is the high decibel scream that can be heard by pets, which can be functioned to threaten a pet for an instant, but can’t be used as a punishing tool for the pet for a long period of time.

C.      Prevent from dog’s threat

When walking in a park, doing sports at outskirts, traveling, working outdoors, etc. , threat of a strange dog might be incurred. When a strange dog follows you, is on your way and approaches you, you should keep calm and remember not running. Aim at target with ultrasonic wave dog training device, press “△” and say loudly “ go away”. As much as possible to let the dog know the sound is sent out by you, you are overmatch and then the will not dare to approach you or leave. Some cowish dogs would leave you as soon as they meet you again.

Note: don’t flirt a strange dog so as to avoid dog’s anti-attack or attack.

D.     Code words of pet training

Short/prompt press “0”, then dog hears a short tone; when press “O” for two seconds, the dog hears a long tone.

○：short tone   ○：long tone    △：high tone     —：pause

A master can set up codes in terms of his own preference, however they should be fixed, rememberable and easy to operate.

Product Specification

Cell Replacement Method

Counterclockwise screw out the three screws on back cover with proper cross screw driver. Cells can be seen after opening the back cover. Take out cells and replace them with new ones. Then recover the back cover.

Notes:

1、  Sound pressure of ultrasonic wave speaker is pretty high, which is not allowed to direct at human ears within a range of 50CM to avoid hearing detriment by high sound pressure;

2、  Ultrasonic wave can only be transmitted in straight line, which is effective only when directing directly at target;

3、  Ambient noise affects ultrasonic wave, thus this product functions even better in field and at night;

4、  Pets being trained are even more sensitive towards this product;

5、  This product is not waterproof, thus be careful for water.

6、  9V alkali cells must be adopted.