5 Usage 
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.
5.1.1 Put SIM card into card box.
5.1.2 Put the card box into host as picture.

.

5.2 GPS Vehicle Tracker Installation
GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without
permission, the user can’t repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself.
5.2.1  Install Wire Box

5.2.2  GPS Vehicle Tracker Installation

Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
 

5.3 Startup
5.3.1  Installed the tracker in the car,then put the SIM card into the tracker host outdoors.
5.3.2  For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
5.3.3  or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the unit has been located.
5.3.4  When this unit receives GPS signals normally, you can use it and do all the following settings.

5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default password: 123456)
 
5.5 Change the password
5.5.1 Send SMS "password+old password+space+new" password to change the password.
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.5.2 you can Send "resume+password" to the tracker, to restore the original setting in case of losing the new password.

5.6 Authorization
There are only 4 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically. 
5.6.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply "admin ok!" in SMS.
5.6.3 Send SMS "noadmin+password+space+authorized number" to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please "send admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.

5.7 Real-time polling
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:
 
5.8 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 15 times:
5.8.1 Set up: Send SMS "at30sum15 " to the unit, it will report the Geo-info at 30s intervals for 15 times. The setting must be maximum 65535 in value.
5.8.2 Send SMS "at30sum0" to the unit, it will reply SMS heaps of times.
5.8.3 Cancel: Send noat+password to delete the “auto track”.
5.9 Remote control oil and circuit
5.9.1 Control oil
Send SMS "stopoil+password" to control oil. For example send SMS:stopoil123456
To supply the oil again, send SMS "supplyoil+password" to the unit.

5.9.2 Control circuit
 Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456
To supply the circuit again, send SMS "supplyelec+password" to the unit.
If there is no authorized number, all number can control. If there is already an authorized number, only the authorized number can control.
 
5.10 Modes switch between "tracker" and "monitor"
5.10.1 The default mode is "tracker".
5.10.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and switch to “monitor”mode.
5.10.3 Send SMS "tracker+password" to the unit, it will reply “tracker ok!” and restore to “track” mode.
           
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS "stockade+password+space+longitude,latitude;longitude,latitude" to unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first longitude& latitude is coordinate of the top left corner of the Geo-fence, while the second longitude&latitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.11.2 Cancel: Send SMS "nostockade+password" to deactivate this function.
This function will be out of effect after the unit moves outside the district.

5.12 Movement alert
5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS "move+password" to the unit, then the unit will reply “move ok!”. In case of such a movement, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.12.2 Cancel: Send SMS "nomove+password" to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.

5.13 Overspeed alert:
5.13.1 Set up: Send SMS "speed+password+space+080" to the unit (suppose the speed is 80km/h), and it will reply "speed ok!". When the target moves exceeding 80 km/h, the unit will send SMS "speed+080!+Geo-info" to the authorized numbers. It will alarm one time in each setting.
5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert

5.14 Restart the tracker.
Send SMS "reboot+password" to the tracker. For example“reboot123456”.The tracker will be restarted.

5.15 SOS button
Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS "help me !+ Geo-info" to the tracker.

5.16 Cut power alert
If cut power,the unit will send SMS alert.
SMS format: " Cut power Alert+Geo-info". 

5.17 set number in a online positioning platform
Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS "number+tracker number" to the tracker.
for example “number13500001111”. need the platform have the fuction.

5.18 Modes switch between “telephone” and “web”
5.18.1 For sending GPS data to IP address:
Set up: Send SMS "web + password" to device.
if set successfully, the device will reply SMS "set web ok".
After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
5.18.2  For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device.
if set successfully, the device will reply ‘set telephone ok’.
And then, the device will send GPS data to your telephone by SMS.
Remark:The default is sending the GPS data to the telephone.

5.19 GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS commands.
5.19.1 Set an IP address and port:
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other platform. Send SMS "IP address+port number" to the unit. If the tracker’s IP address and port should be modified to 123.98.43.254and 2456, send SMS "ip 123.98.43.254port2456"to the tracker.
5.19.2 Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is "apn + password +space + APN". For example you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN ok. " .
5.20 Set Time
In order to make the time as the same with the user country,please send SMS command "zone123456 space time zone". For example,if user country time is GMT+8,then send"zone123456 8"to the device. If user country time is GMT-6,then send"zone123456 -6"to device. The device will reply SMS"set time zone ok".
5.21 Set Web
In order to see your website in each replying SMS ,For example you website is www.webs***.com, then send "home123456 www.webs***.com" . Then it will reply"set home ok",when you want to cancel it, just send "nohome123456",it will reply SMS"cancel home ok".

6 Cautions
6.1 Make sure to read this manual carefully before using this product.
6.2 Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally.
6.3 The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work voltage.
6.4 Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power.
6.5 The tracker works in wireless communications, to avoid electromagnetic interference or incompatible configuration, please stop using your tracker in the noticed place.
6.6 Keep the unit dries. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
6.7 Clear the unit with a piece of dry cloth. Don’t clean in chemicals or detergent.

7. Faults & The solutions
Faults Solution
Startup Fail Check the battery and see if it is fully charged or correctly installed.
Hang up Fail In existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers.
Monitor Fail Check if the authorized number is setup or in the coverage of signals.
Location report in
digits of zeros.  Don’t use it in the place beyond reach of signals. Place the unit outdoors, especially when starting it up.