500m RECHARGEABLE

REMOTE DOG TRAININGCOLLAR

(Generation 8)

6 Levels Micro static shock + Vibration + Sound

PK-300 Remote Control Training Collar User’s Manual

Thank you for choosing our product!

Please read this manual carefully before using the product.

Please do read the Cautions, for fear that unwanted results arise from improper operation.

Preparation before using

1.      Make sure that batteries are installed in the remote controller and the receiver( the collar ) is charged up .

2.      Checking the remote controller:turn on the power and press the button on the remote controller, the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.

3.      Checking the receiver: shake the receiver , the power will be connected automatically , and the indicator light will light . If the indicator does’t light , it maybe because of the shortage of the power ., then you shoule charge the battery with matched charger . The power indicator light will flash slowly while charging . When the charging is finished , the indicator light will light all the time.

4.      Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.

5.      Respectively press the launch buttons on the remote controller, the receiver will make vibration or shock – six different degree shocks.

6.      When pressing the remote controller, it will vibrate or make a BB sound . The vibration means the receiver is vibrating while the BB sound indicates the electricity is being given from the receiver.

7.      The shock can be used  to curb the improper deeds of the pet. You can choose the degree of the shock on the remote controller according to the personality of the dog . After each successful check, you should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like.

8.      The vibration signal can train the dog to take the orders from the master.

9.      .Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.

Operational instructions:

1．  Turn the switch of the remote controller to the “ON” position. Turn it “OFF” if you don’t use it, for fear of mistaken operation.

2．  Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert a finger in between.

3.      Most pets feel uncomfortable at first wearing the collar. Don’t use the shock function at that time until you are sure that the pet has gotten used to the collar. The shock is used to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.

4.      You can call your dog soundlessly by “vibration” and convey your orders in a long distance.

5.      If you don’t use this product, take the collar and receiver off the pet and put them to the place without vibration., the power will be cut automatically.

6.      If you don’t use the product for a long time, take out the batteries in the remote controller.

How to charge up the receiver and change the battery in the remote controller

1．  Receiver: If the power can’t be connected automatically and the power indicator light doesn’t light after shaking the receiver , you must charge up with the matched charger.

2．  Remote controller: The battery cell cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (Model 6LR61, 9V) and put a new one back and then close the cover.

3．  The lifetime of the batteries vary according as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send signals, its batteries’ lifetime is usually more than one year. After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. A frequent use of it will consume electricity quickly. Therefore you should often check the batteries by watching the indicator light.

Cautions:

1.   At first wearing this collar, some pets will feel uneasy. Give the pet some time to get used to it. Don’t use the shock function of this product until you are sure that the pet has gotten used to it.

2.      A vibration induction switch is installed in the receiver. If you let the receiver at rest over 5 minutes , the power will be cut automatically , and if you shake the receiver , the power will be connected automatically.

3.      Digital audio transmitting technology is applied in the remote controller. Remote control signals can penetrate obstacles. It is unnecessary for the remote controller to point directly at the receiver. However, obstacles will affect the valid distance of remote controlling.

4.      The valid distance of remote controlling means the straight-line distance between the remote controller and the receiver without obstacles in between. If there are interference signals or signal screening around, the actual remote control distance may be shorten。

5.      The shock function of the receiver is used to curb the improper deeds of the pets. You should not use this function for a long time (the time should be within 30 seconds) Please be advised that don’t use the shock to make fun of the pet.

6.      Presently, this product is the most humane tool for pet training. Following the correct operational instructions, you can effectively train the pet and bring it no harm.

7.      Though the receiver is waterproof, you cannot immerse it into the water for a long time. And you should keep the remote controller out of water.